VistaLab 2100-0003, Руководство по эксплуатации, Страница: 20 / 20

<- Back to T.O.C.
P a g e | 20
Declaration of Conformity
VistaLab Technologies Inc. declares on its own responsibility that the devices
ali-Q 2 aliquoting pipet controller, Model 2100-0005
ali-Q 2 LS aliquoting pipet controller, Model 2100-0003
ali-Q 2 VS aliquoting pipet controller, Model 2100-1005
comply with:
Green/Ecodesign Regulations
Meet CEC, DoE Level VI, Energy Star, ErP Stage 2
NRCan & GEMS
No Load Power Consumption Less 0.075W
Standards for EU
Safety requirements for electrical equipment for measurement, control
and laboratory use- General Requirements
EN 61010-1:2010
Electrical equipment for measurement, control and laboratory use- EMC
requirements
EN 61326-1:2013
Information Technology Equipment Safety General Requirements EN60950-1:2006
A2:2013
Standards for Canada and USA
Safety requirements for electrical equipment for measurement, control
and laboratory use- General Requirements
CAN/CSA-C22.2
No. 61010-1
Safety requirements for electrical equipment for measurement, control
and laboratory use- General Requirements
UL 61010-1
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Part 15 of the
FCC Rules Class A
Copyright ©2020 VistaLab Technologies, Inc. USA. All rights reserved, including graphics and images.
No part of this publication may be reproduced without prior permission of the copyright owner.
VistaLab Technologies and the VistaLab Technologies logo are trademarks of VistaLab Technologies,
Inc. USA. ali-Q is a trademark of VistaLab Technologies, Inc.
Registered trademarks and protected trademarks are not marked in all cases with
®
or
™
in this
manual.
U.S Patents are listed on www.vistalab.com/about/quality-management
Lit # : L080-0060-001 Rev D