Ref: VPSU2488INTe
24V
AC
P
OWER
S
UPPLY
VPSU2488INTe
M
ANUAL
24V
AC
8A
(8
X
1A
PTC
F
USED
O
UTPUT
)
Thank you for choosing this high quality 24V ac 8A power supply. Before
attempting to connect or operate this product please make sure you carefully read
these instructions for your safety.
General:
A 24V ac power supply capable of delivering fully rated current to load, housed within a low profile metal
enclosure it is suitable for internal use only. It is provided with 8 individually PTC fused outputs ideal for
low powered CCTV installations.
I
NSTALLATION AND
S
ET
-U
P
This unit is only suitable for installation as permanently connected equipment and
MUST
be fed from a
mains power source having a separate (approved) disconnect device - fitted with a fuse or other over-
current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate
earth fault protection to the applicable standard.
The enclosure is
NOT SUITABLE
for external use; bushings should meet a minimum flammability
specification of UL94 HB.
The PSU should be installed according to all relevant safety regulations.
1)
Fix to wall or other support structure using the screws/fixings supplied or use appropriate types for
the surface it is being mounted to.
2)
Mains input cable must be to the applicable standard with a 3A or greater current capacity, having a
minimum operating voltage of 300/500 Vac.
3)
The low voltage output cable must be correctly sized to carry the rated load current to the devices
connected to the PSU.
4)
Mains input and low voltage output cables should be routed to use different entry/exit holes in the
enclosure.
5)
To comply with current BS EN60950 safety legislation the supplied cable ties must be used to secure
mains input and low voltage output wiring.
Norbain SD
Tel: +44 (0)118 912 5000
210 Wharfdale Rd,
Fax: +44 (0)118 912 5001
Winnersh Triangle,
Web:
www.vista-cctv.com
Wokingham, Berkshire,
RG41 5TP, UK.
