VL-NVR 4/8/16CH Quick Guide V1.1
Page 15
2.4 Main Interface
2.4.1 Main Interface Introduction
The buttons in the lower area, labelled as 1. in the above screen menu, are listed in the table below.
Button
Meaning
Start button. Click it to pop menu area
③
.
Full screen button. Click to show full screen; click again to exit full screen.
Screen mode button (according to individual models ).
Dwell button.
Click to enable OSD; click
to disable OSD.
Click to set the default playback time before starting instant playback or going to the
playback interface for playback operations. Click
to go to the playback interface. For
instance, if you choose “5 minutes ago” as the default playback time, you will playback
recordings from the past five minutes.
Manual record button. Click to enable/disable record.
Manual alarm button. Click to trigger or clear the alarm-out manually in the popup window.
Record status button. Click to view the record status.
Alarm status button. Click to view the alarm status.
Disk status button. Click to view disk and RAID status.
Network status button. Click to view network status.
Information button. Click to view system information.
Click button to enable cloud upgrade.
The buttons in the right-hand area, labelled as
②
in the previous screen menu, are listed in the table below.
This area is hidden by default - move the cursor over the area to reveal it. Click
“Camera” to view all the added cameras in the
