VISSONIC Electronics Limited www.vissonic.com
Fig. 3-3 “IR Coverage in “blind Area”
Fig.3-1 Square IR coverage
3.4.2
Wiring of the radiator
The signal’s delay can be caused by the distance
difference between the system transmitter to the
different radiator. In order to avoid “blind spot” ,
please choose the cables that are of same length.
The cable delay can be compensated via the
signal compensation button inside of the radiating
panel.
Fig.3-2 Audience seats and chairman seats
coverage
If there are IR barricades in the room, extra
radiator should be added to increase the radiation to
ensure the normal transmission of the signal.
Fig.3-4 Non-symmetrical connection, should be
avoided
Digital IR Language Distribution System User Manual
When the radiator cannot be installed onto
the existing ceiling, walls or bearing structures,
they must be installed according to the above
mentioned rules to ensure the proper signal
transmission.
12
