VISSONIC Electronics Limited www.vissonic.com
90°installation figure
1.4.5
Floor
area
of
overlapping
and
multi-path effects
The installed radiation board in meeting room, if
was overlapping, the overall coverage may be greater
than the radiation of two separate panels. Radiation
intensity is greater than the area needed.(As shown in
the Figure)
The added area increases the coverage
The receiver machine receive signal from many
radiation boards. It may be offset by delay, or can’t
receive signal at all. Signal delay can be compensated
by radiating panel switch delay compensation.
The signal delay reduces the coverage area
Digital IR Language Distribution System User Manual
11
