MENUS AND FUNCTIONS
D-307503 PowerMaster 360 User's Guide
19
A.2 Returning to the previous step or exiting the USER SETTINGS menu
During the setting process it is frequently necessary to return to the previous setting step or option (i.e. "to go
one level up") or to exit the User Settings menu.
A. To move one level up
To move one level up during the setting process, click
once. Each click takes you one level up or to the
previous setting step:
B. To exit the USER SETTINGS menu
Any screen
To exit [
USER SETTINGS
], move up the menu by pressing
repeatedly
until the display reads [
<OK> TO EXIT
], or preferably, press
once which
brings you immediately to the exit screen [
<OK> TO EXIT
].
or
<OK> TO EXIT
When the display reads [
<OK> TO EXIT
], press
READY 12:00
The system exits the [
USER SETTINGS
] menu and returns to the normal disarm
state while showing the READY display.
A.3 Keys used for navigation and settings
You can use the keypad for various programming functions. The following table provides a description of the
keys and their functions.
Button
Definition
Navigation / Setting Function
NEXT
Use to
move / scroll forward
to the next menu options.
BACK
Use to
move / scroll backward
to the previous menu options.
UP
Use to move
one level up
in the menu or to
return to previous setting step
.
OK
Use to
select a menu option
or to
confirm a setting or action
.
HOME
Use to
move one level up
in the menu or to
return to previous setting
step
.
AWAY
Use to
jump back
to the [
<OK> TO EXIT
] screen to quit programming.
OFF
Use to
cancel, delete, clear or erase
setting, data, etc.
0 - 9
Numerical keypad used to enter numerical data.
B.1 Setting the zone bypass option
Bypassing permits arming only part of the system while allowing free movement of people within certain zones
when the system is armed. It is also used to temporarily remove from service faulty zones that require repair
work or to deactivate a sensor if, for example, you are decorating a room.
Here you can set the Zone Bypass Scheme i.e. to scroll through the list of registered (enrolled) sensors to
your PowerMaster-360 system and to Bypass (deactivate) faulty or disturbed sensors (either READY or
NOT-READY) or to Clear (reactivate) BYPASSED zones (sensors).
Once you have set a Bypass Scheme you can use the following 3 options:
>
To quickly review the bypassed zones – refer to section B.2.
>
To quickly clear a bypassed zone i.e. to reactivate the bypassed zone – refer to section B.1.
>
To repeat (recall) the last used zone bypassing scheme – refer to section B.3.
