Vislink DXL5000 RX, Руководство пользователя и техническое руководство

Страница: 23 / 40

Operating the DXL5000 3-5 DXL5000 User and Technical Manual
3.3 Setting Radio Parameters (Setup Tab)
The Setup tab lets you define the Identification, Radio and Modulator parameters.
3.3.1 Setup–Identification Screen
IP Address Enter the unique network address of the DXL5000 and click Submit . You must
reboot the system to effect the change.
Subnet
Mask Enter the IP address range of the local network and click Submit . You must reboot
the system to effect the change.
Default
Gateway Enter the IP address of the router that the system uses to communicate with
remote system addresses and click
Submit . You must reboot the system to effect
the change.
Site Name Optionally enter a name to identify the location of the DXL5000, which is displayed
on the login screen.
Call Sign Optionally enter a call sign for the DXL5000 transmitter.
Date
Installed Optionally enter the date the DXL5000 was installed for later reference.
User
Information
1, 2, and 3 Optionally enter any type of information that you want to associate with the radio.