Template Operators Manual
Specifications
Issue No: 1
Page: 14
Ref: DVE6-ASUM-70xx
Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies
3.5.2.
IP Video (Future option)
Type
10/100/1000Base-T Ethernet
Protocol
IEEE802.3 Ethernet
Encapsulation for ASI - RTP (RFC 2250), ARP, IPv4,
IGMPv2/3, TCP/UDP, RTP only receive.
FEC
Pro-MPEG Forum Code of Practice #3 release 2 (CoP3)
/ SMPTE 2022-2007 (Columns and Rows)
1 -7 TS (ASI) packets per IP packet (configurable) with
L&D following the following range: L*D ≤100 1 ≤ L ≤ 20
4 ≤ D ≤20
In RTP only.
NOTE: The DVE6100 Exciter can stream or receive a stream to the above
specification converting to or from ASI.
NOTE: The unit can carry IP “data” in one direction for addition of data to the
internal video. Data is presented on a separate PID.
NOTE: IP IN (the extraction of ASI from an IP Video stream) and IP OUT
(encapsulation of ASI into Ethernet), and IP data are chargeable licensed
options.
Licenses are field upgradeable. You can enter additional licenses in the field –
please contact factory for further information & pricing.
IP IN can be used as an external source to the modulator or multiplexed with the
internal encoder to form a multiple service.
IP OUT function enables ASI transmission over Ethernet networks rather than RF
over satellite or microwave.
The source for the IP output can independently come from either the internal
encoder (after multiplexer, so could be two or more services) or the external ASI
connector.
The unit supports multicast and, if the destination address is set in a multicast
address range 224.0.0.0 through 239.255.255.255 inclusive, automatically
enables.
