Visionis VS-AXESS-1ETL, Руководство пользователя

Страница: 83 / 123

Access Control Terminal
·
User Manual
75
2. Select the card type according to actual needs.
Note: For details about the card type, refer to Adding Person.
3. Input the password of the card itself in the Card Password field. The card password should
contain 4 to 8 digits.
Note: The password will be required when the card holder swiping the card to get enter to or exit
from the door if you enable the card reader authentication mode as Card and Password ,
Password and Fingerprint , and Card, Password, and Fingerprint . For details, refer to Chapter
9.6.2 Card Reader Authentication.
4. Input the card quantity issued for each person.
For example, if the Card Quantity is 3, you can read or enter three card No. for each person.
5. Click to set the effective time and expiry time of the card.
6. Select the Card Reader Mode for reading the card No.

Access Controller Reader: Place the card on the reader of the Access Controller and click
Read to get the card No.

Manually Input: Input the card No. and click Enter to input the card No.
7. After issuing the card to the person, the person and card information will display in the Person(s)
with Card Issued list.
8. Click OK to save the settings.
9.4 Schedule and Template
Purpose:
You can configure the template including week schedule and holiday schedule. After setting the
templates, you can adopt the configured templates to access control permissions when setting the
permission, so that the access control permission will take effect in the time durations of the
template.