Visioneer Rabbit PC30dwn, Руководство пользователя

Страница: 82 / 121

Maintenance Visioneer
®
Rabbit™ PC30dwn
User Guide
79
Cleaning the Outside of the device
Excessive dust accumulation around and on the device will pull into the device during the scanning
process and clog the ventilation openings.
You should clean the inside of the device at least once a week or
as needed depending on how often the device is used. If cleaning the scanner does not resolve any image
quality issues, please follow the instructions in the next section for calibrating the scanner.
1. Turn off the device power.
2. Using a soft dusting cloth, wipe down the body of the device, input tray and exit area. Make sure that
the input and exit slots in the device are also clean.
3. If there is any accumulation of dust in the indentations around the buttons, use a blower brush to
gently brush away the dust.
4. When you’re finished, press the power button to turn the device back on.
Cleaning the Inside of the device
Note: Clean the inside of the scanner to remove dust and paper debris from the copier glass, pickup and feed
rollers. Cleaning the inside of the device helps to keep your device operating at optimum performance. Dust
accumulation will prevent documents from feeding straight through the scanner, dust on the scanner glass
will appear as lines in the scanned image.
Safety Precautions
■
Keep the isopropyl rubbing alcohol away from fire, heaters or any open flame or heat source as any
form of alcohol is flammable.
■
Wear protective gloves as theisopropyl rubbing alcohol may irritate sensitive skin.
■
Only clean the areas described in this section.
■
Do not leave the isopropyl rubbing alcohol or any of the cleaning supplies where children can access
them.
■
Always turn off the device and unplug the device’s power and USB cable prior to cleaning.
Preparation
■
Roller cleaning papers can be purchased from our website at
www.visioneer.com
in the Supplies &
Accessories page for your device.
■
When cleaning the inside of the device, you should do everything at the same time.
■
Use scissors to open the roller cleaning paper bag, cutting across the dotted line.