Visioneer Rabbit PC30dwn Скачать руководство пользователя страница 74

Страница: 74 / 121

Maintenance

Visioneer

Rabbit™ PC30dwn

User Guide

TROUBLESHOOTING

Error Message

Possible Causes and/or Solutions

Service code: 100111

Restart printer. If this error persists, call

service for help.

I2C error (100112)

Call service for further help.

Printer module error (205000,
205001, 205101)

An unexpected error from printer parts

occurs.

Restart printer or call technical support to

replace printer parts that fail.

Motor error (000001)

When printer is booted, the device and

printer engine Initialization fail.

Restart printer and/or call service.

Fan fails (200090)

Call technical supporttechnical support to replace the fan.

Front cover opens (200051).

Please close front cover.

Rear cover opens (200054).

Please close rear cover.

Continue feed error (200000).

Please open front cover to clear the paper

and load paper to proper tray.

Fuser error (201600,
201604~5,

201613, 201615~201618,

201621~201623)

Please restart printer. If the error persists,

call technical support for help.

Device lamp error (940305)

Close the scan module and then restart the

printer. If the error persists, call service

personnel for help.

AFE R/W error (940306)

Restart the printer. If the error persists, call

technical support for help.

Please load paper in manual
tray

(200080).

Paper empty in the manual tray.

Please check tray 1 (200003)

Pick up error. Paper empty, paper jam, or

pickup failed in tray 1.

Please load paper to tray1
(200081)

Tray 1 paper empty.

IP conflict (500000)

Check your network settings.

DHCP no response (500002)

Check network settings.

USB flash disk not found

Insert USB flash drive to the USB flash

port.

USB flash disk connection fails.

Job abort

Check the connection of USB flash drive.

Содержание Rabbit PC30dwn


























































































































Результаты поиска

Содержание Rabbit PC30dwn

Отзывы:

Visioneer Rabbit PC30dwn, Руководство пользователя, Страница: 74 / 121

Результаты поиска

Содержание Rabbit PC30dwn

Отзывы: