Visioneer Rabbit PC30dwn, Руководство пользователя

Страница: 61 / 121

Visioneer
®
Rabbit™ PC30dwn Copying
58
User Guide
■
Extremely smooth, shiny, or highly textured paper may cause the paper feed rollers to slip across the
page and cause the device to report a paper jam.
■
Carbonless copy paper may tear while being fed through the device and the pressure of the rollers
may leave streaks on the page. The chemical coating on this paper will rub off on the rollers during
the scan process, increasing the frequency of miss-feeds and paper jams.
■
Partially transparent paper such as tracing paper as any images from the opposite side of the page
or black background will appear in the scanned images.
UNSUPPORTED DOCUMENT TYPES
Do not scan the following types of documents as they may cause damage to the device.
■
Items outside of the specified supported sizes, thickness, and weight defined in this document.
■
Non-rectangular or irregularly shaped paper will cause the device to detect and report document
skew errors or paper jams.
■
Carbon paper that will leave residue in the device and on the rollers that will transfer to the next set of
documents scanned.
■
Documents with hard items attached such as paper clips, binder clips, and staples.
■
Documents with wet ink or white-out.
■
Thermal or photosensitive paper.
■
Overhead projector sheets, plastic film, camera film, and any other type of transparent or partially
transparent plastic item.
■
Documents that have been glued together.
■
Cloth or metallic sheets.
SIMPLEX COPY
1. By default, the
Simplex Light
should be lit on the Control Panel.
Note:
If the Simplex Light is not lit, press the
Mode Button
until the
Simplex Light
is lit as indicated.
Mode Button
Simplex Light