Visioneer PATRIOT H60, Руководство пользователя

Страница: 36 / 59

V
ISIONEER
®
P
ATRIOT
TM
H60 / H80 M
AINTENANCE
36
S
CANNER
U
SER
’
S
G
UIDE
H
ARDWARE
P
ROPERTIES
You can use the scanner’s properties page to keep track of scanner maintenance, change some of the hardware
options, configure the scanner interface behavior, and adjust application options that may be available for your
scanner.
To open the scanner hardware properties page:
■ Windows 7 and later—from the Windows Control Panel, open Hardware and Sound and then Devices and
Printers .
Right-click on the scanner and then select Scan properties from the list. Click Yes if you are prompted by the
Windows User Account Control to confirm that you want make changes to the system settings.
Device Settings
The Device Settings tab shows the hardware information for your scanner. The options on the Device Settings tab
will be available based on whether or not the scanner hardware supports the feature. Some features described
herein may not be available for the current scanner. Please disregard any information about features that you do
not see in the interface for your scanner.
Scanner Details
■
Firmware version —this is the scanner’s hardware processor version number.
■ Serial number —the scanner’s unique identification number.
■
LLD version —the scanner’s base driver version. This is not the OneTouch software revision, TWAIN or WIA
driver versions.
■
Driver version —this is the version of the scanner’s TWAIN driver.
Scanner configuration
■ Counters —click the reset button next to the counter you want to set back to 0.