© 2021
Order #XXXXX
Locked layer contains
placeholder marks.
Completed Assembly
Item
1
2
3
4
5
6/6A
Qty.
1
1
1
1
1
1/1
Description
40” Vertical Extrusion
40” Vertical Extrusion
40.418” Curved Extrusion
40.418” Curved Extrusion
40.418” Curved Extrusion
23.55” Horizontal Extrusion
1
3
2
Infill
Infill
Steps:
1) Attach Curved Extrusions [3, 4, 5] to Verticals [1, 2], with Infills between as shown.
2) Attach Horizontals [6, 6A] between Verticals [1, 2].
3) Place lower Shelf on Lip of Curved Extrusion [4]. See
Extrusion Lip
detail.
4) Attach Shelf Supports to Velcro inside of assembled Pedestal base.
5) Place upper Shelf on top of Shelf Supports.
6) Place Pedestal Top on top of assembled Pedestal base. See
Pedestal Top Attachment
detail.
*
*
4
5
6
6A
Pedestal Top
(3) Shelf
Supports
Shelf
Shelf
Extrusion [4] has a Lip
for the Shelf to rest upon.
Lip
Extrusion Lip
Align hole with pin
Rotate pin. Spring
will push pin into hole.
Pedestal Top Attachment
1
2
*
Pin
Hole
*
*
MOD-1299 Pedestal
If you would like to tell us about your experience with your setup instructions please email us at
SETUP INSTRUCTIONS
