w w w . c l a s s i c
e x h i b i t s . c o m
Step 1
Page 1 of 4
866.652.2100
© 2010
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - MOD-1176 - Counter Assembly
Description
42”h Vertical Extrusion
34.7” Curved Vertical Extrusion
4”w Shelf Support
42”h Vertical Extrusion w/ Door HInges
42”h Vertical Extrusion w/ Door Stop
20.6”w Horizontal Extrusion
11.5”w Horizontal Extrusion
Item
1/2
1A/2A
1B/2B
3
4
5
6
Qty.
1/1
1/1
2/2
1
1
4
4
Steps:
1) Attach curve pieces [1A and 2A] to vertical extrusions [1 and 2 ]
using V10 connectors as shown.
2) Connect shelf supports to curve extrusions [2A and 1A] as shown.
3) Connect lower horizontal extrusions [5 and 6] between verticals [1, 2, 3 and 4].
4) Place infills and attach door where indicated.
5) Connect upper horizontal extrusions [5 and 6] between verticals [1, 2, 3 and 4].
6) Velcro shelf supports to inside of assembled base.
7) Please internal shelf atop supports.
8) Set lower tier counters atop curve verticals and secure
to straight verticals using thumbscrews and washers.
9) Set counter top on assembled base.
Door Attachment
Slide pin into
hinge attached
to vertical.
Slide door
hinge atop pin.
1
2
3
4
2A
6
1A
5
Hinges
Door Stop
6
5
Tighten
Screw
Slide V10 between
grooves of extrusions.
V10 Pressure Screw
V10 Attachment
Use hex key tool to
tighten in place.
Velcro Strip
Shelf Support
Holes
Holes
Holes
Lower Tier Counter Attachment
Use thumbscrews and washers to
secure counter top vertical.
6
5
6
5
Door
Infill: 12”w x 38.918”h
Infill: 12”w x
38.918”h
Front Infill:
12”w x 38.918”h
Internal Shelf
Holes
2B
2B
1B
1B
