2
VISION TV / SAT Power Tester - V18-310
Instructions
•
This innovative tester will assist professional installers of
domestic TV and satellite systems, commercial and
communal IRS, CATV and MATV.
•
It will accurately simultaneously measure the DC voltage
(30v Max) and DC current (10A max) passing through a 75
ohm coaxial cable. It will also simultaneously indicate if a
22kHz signal is present on the coax cable in satellite
systems connected to: legacy satellite receivers SKY+,
Sky+HD, Sky Q, Freesat, Freesat HD, dSCR, SCR and DiSEq
installations etc.
•
IMPORTANT: The V18-310 TV/ SAT Power Tester requires
a PP3 (6LR61, MN1604) 9V battery and the press to test
button operated to make accurate current
measurements, but for convenience it will indicate an
approximate current value when line powered and/or the
press to test button is not operated.
•
The V18-310 TV/SAT Power Tester will pass RF frequencies
with minimal attenuation so that voltage and current
measurements can be made while operating TV and
satellite equipment.
Introduction
