Vision Multi Axis, Руководство по эксплуатации

Страница: 37 / 41

Chapter 5 - Maintenance 37
DO NOT use any lubricant other than silicone, as it may become sticky and cause a buildup that can cause mechanical
failure.
(Figure 5.2) The Lubrication Areas
(Figure 5.3) The Lubrication Areas
What not to lubricate
Many of the bearings and assemblies in your engraving machine are sealed and/or coated using special low-friction
methods and should not be lubricated.
DO NOT attempt to lubricate the spindle or the spindle bearings. If you suspect lubrication problems, call your
dealer/representative for instructions, as further lubrication may harm the machine.
DO NOT oil the X or Y stepper motors. None of the motors on the MAX Engraver require lubrication. Oiling the
stepper motors can permanently damage the motors.