5
1
STEP
1
STEP
• Slide the axle, with right stabilizer
attached, through the right guide rail
and through the frame of the product.
• Slide the left guide rail onto the left
side of the axle. Slide the left
stabilizer onto the end of the axle and
fix in place with a screw (M8x20L).
Tighten with the 5
MM
Allen wrench.
ORANGE BAG
2
STEP
• Place a teflon washer (10.5x25.1t)
on the threaded stud of the rotation
linkage.
• Place the bracket end of the pedal
arm over the rotation linkage so that
the threaded stud on the linkage
inserts through the hole on the pedal
arm bracket. Fix in place with a
teflon washer (10.5x25x1t) a washer
(10.2x25x1.5t) and nut (M10).
Tighten with the 17
MM
wrench.
• Place the pedal arm bracket cover
over the bracket and secure in place
with the washer (5.5x10x1.2t) and
screw (M5x10L). Tighten with the
Phillips screwdriver.
• Repeat these steps on the opposite
side.
BLUE BAG
2
STEP
