SLB-500-W5K7-P-24V
Commissioning
6.3 Connecting
NOTICE
Cable damage
•
Comply with the specified minimum bending radius.
•
Cables must generally be mounted with a strain relief clamp.
•
Use cables corresponding to the specification (see data sheet).
6.3.1 Pin assignment
Use the M8 connector to connect the device according to the pin assignment.
Pin assignment
1
2
3
4
Image 5: M8 connector, 4-pin
Connection diagram
V+
GND
1
3
4
BU
BK
BN
ON/OFF
Pin Core colour
Signal
Description
1
BN (brown)
V+
Operating voltage
2
WH (white)
NC
Do not use
3
BU (blue)
GND
Ground
4
BK (black)
ON/OFF
Switch input
© Vision & Control GmbH 2021
999.995.394.10-en-1.2
21
