Vision & Control pictor N Series Скачать руководство пользователя страница 28

Страница: 28 / 36

pictor® N
Maintenance and Technical Support

170

119_99

9.994

.899.10

-e

MAINTENANCE AND TECHNICAL SUPPORT

7.1 Maintenance

The device is maintenance-free. Depending on the operating environment,
the device may have to be cleaned.

Cleaning the outer face

•

Clean the outer surface with a damp cloth or a brush.

•

Remove heavy contamination with a cleanser approved for anodised
aluminium. In doing so, follow the instructions for using the cleanser.

•

Cleansers must not be applied directly to the casing, the casing must not
be immersed in the cleanser.

Cleaning by the manufacturer

After prior consultation of the technical support, the device can be sent to the
manufacturer for cleaning (for a fee).

7.2 Technical Support

Please contact your local sales partner or our Technical Support if you have
any questions concerning the device.

Vision & Control GmbH
Mittelbergstraße 16
98527 Suhl
Germany
Telephone: +49 (0) 3681 7974-11
Telefax:

+49 (0) 3681 7974-33

Email:

[email protected]

www.vision-control.com

NOTE

Never touch or blow on the image recorder. These actions can destroy it.

Содержание pictor N Series





































Результаты поиска

Содержание pictor N Series

Отзывы:

Бренды по названию

Популярные бренды

Vision & Control pictor N Series, Руководство пользователя

Результаты поиска

Содержание pictor N Series

Отзывы:

Бренды по названию

Популярные бренды