background image

A-DIF-60x90-W5K7-SL

Technical Data

5.2 Electrical Parameters

NOTICE

If the lighting is operated by using power sources of other manufacturers,

verify that temperature, current and pulse time have to be kept inside

specified limits! Please refer to the diagram: 

"Pulse load "

.

There is no automatic limitation of the electrical parameters. The temperature

of the device is not monitored automatically.

Parameter

Min

Nom

Max

Continuous operation

LED current I

LED

1.3 A 

(1)

2.4 A 

(2)

Forward voltage U

LED

 at I

LED Max

5.5 V

6.9 V

Power consumption P

tot

8.0 W 

(1)

Flash mode / Pulse mode

LED current I

LED

14.4 A 

(2),(3)

Forward voltage U

LED

 at I

LED Max

8.1 V

9.5 V

Flash performance P

flash

120.0 W 

(2),(3)

(1)

The nominal values refer to an ambient temperature of 25 °C and free

convection.

(2)

Maximum power of the lighting (maximum current) is achieved at optimal

heat dissipation only.

(3)

Error-free operation is only guaranteed in combination with vicolux

smart light controllers. The controller limits the electrical parameters

automatically and also monitors the temperature of the device.

18

999.995.568.10-en-1.0

© Vision & Control GmbH 2019

Содержание A-DIF-60x90-W5K7-SL





































Отзывы: