manualshive.com logo in svg

Vision & Control 2-05-608, Инструкция по эксплуатации


Поделиться
Скачать
background image

TOB42/11.0-145-F10-WN

Commissioning

6.2.1 Mounting at the clamping area

The assembly of the lens takes place at the clamping area (1). The appropriate

mounting adapters are available as accessories.

see "Lens holder", page 11

1. Loosen the socket head cap screws of the objective holder.
2. Place the objective holder in the desired position in the clamping area.
3. Tighten the socket head cap screws of the objective holder by hand.

6.2.2 Mounting of filters

Lens filters are connected to the lens via the filter connection (2) resp. (3).
1. Insert the filter into the filter thread (2) resp. (3) of the lens.
2. Screw the filter to the lens hand-tight.

6.2.3 Mounting at the camera

The lens is connected to a suitable camera via the C-mount connector (4).
1. Attach the lens to the C-mount connector on the camera.
2. Screw the lens to the camera hand-tight.

© Vision & Control GmbH 2019

999.995.975.10-en-1.3

31

Содержание 2-05-608









































Отзывы:

Нет отзывов

Похожие инструкции для 2-05-608

Бренды по названию

Популярные бренды

Загрузить еще бренды