Vision & Control 1-47-112 Скачать руководство пользователя

Страница: 29 / 32

LDLF60x180-B470/24V

Disposal

9 DISPOSAL

The device and its accessories and packaging must be sent to environmentally

compatible recycling.
Do not throw electrical devices or tools into the household waste!

According to European Directive 2012/19/EU on waste electrical and electronic

equipment and its implementation in national law, unusable electric tools must

be collected separately, and sent to environmentally compatible recycling.
Disposal, including that of individual components, must also always be in a

way that does not harm the environment, which means it must be done in

accordance with the currently valid legal regulations.
Please contact the manufacturer, your local specialist dealer or the relevant

national authority for the proper disposal of old devices.
The electrical and electronic components must be sent to a specialist recycling

company or to the manufacturer for proper disposal.

999.995.650.10-en-1.0

Содержание 1-47-112

































Результаты поиска

Содержание 1-47-112

Отзывы:

Похожие инструкции для 1-47-112

Бренды по названию

Популярные бренды

Vision & Control 1-47-112, Инструкция по эксплуатации

Результаты поиска

Содержание 1-47-112

Отзывы:

Похожие инструкции для 1-47-112

Бренды по названию

Популярные бренды