TZB10-B450-HP-24V
Commissioning
6.3 Mounting the accessories
Mount the Lens Holder
a
a
1.)
2.) 3.)
1. Loosen the M5 hexagon nuts (a) on the lens holder.
2. Slide the lens holder to the desired location on the lighting.
3. Tighten the M5 hexagon nuts alternately hand-tight in small steps.
Mount the Filter adapter (slip-on adapter)
1.)
2.) 3.)
a
a
a
1. Loosen the M3 threaded pins (a) of the slip-on adapter.
2. Attach the slip-on adapter on the lighting.
3. Tighten the M3 thread pins alternately hand-tight in small steps.
Then screw the filter into the internal thread of the slip-on adapter.
22
999.995.425.10-en-1.6
© Vision & Control GmbH 2021
