DL30x90-IR850/24V
Maintenance and Service
8 MAINTENANCE AND SERVICE
8.1 Maintenance
The device is maintenance-free. Depending on the operating environment, it
may have to be cleaned.
The housing can be cleaned according to the conditions applicable to the given
protection class.
Cleansers must not be applied directly to the housing, and the housing must
not be bathed.
Cleaning the outside
•
Clean the outside with a damp cloth.
•
Remove excessive dirt with an approved anodised aluminium cleaner. Refer
to the instructions of the cleaner.
•
The connectors must be clean and dry before the device is connected and
put into operation.
Cleaning the cover (light-emitting surface)
•
Use a soft, clean cloth for cleaning.
•
The cover must be cleaned with an approved PMMA
(Polymethylmethacrylat) cleaner. Refer to the instructions of the cleaner.
Cleaning by the manufacturer
The device can be sent to the manufacturer for cleaning (for a fee). Please
contact our technical support.
© Vision & Control GmbH 2019
999.995.554.10-en-1.0
27
