Viscount Legend '70s Artist, Руководство пользователя

Страница: 10 / 146

EN - 8
Legend ‘70s – User Manual
Front panel
Main panel
The main panel is the fixed section of the instrument. Here you can find the general volume, a three-band
equalizer section, a reverb section, effect controls and a section that controls all the parameters that appear on
the display, i.e. sounds, effects and system parameters.
Volume control and EQUALIZER section
[MASTER VOLUME] knob.
This knob controls the instrument's general volume.
EQUALIZER [LOW], [MID] and [HIGH] slider.
This slider controls the general equalizer. Each slider has a gain range between -12 dB and +12 dB for
[LOW], [MID] and [HIGH] frequencies. The equalizer affects the stereo signal on the MAIN [L/MONO] and
[R] outputs and the headphones output. The AUX [1] and [2] outputs are unaffected by this control.
The equalizer can be adjusted in several ways by accessing the dedicated controls through the display.
For further information on this subject, read the
Equalizer Section (page 54 ).
REVERB section
This section on the main panel includes the main controls of the reverb effect.
The reverb effect affects the stereo signal on the MAIN [L/MONO] and [R] outputs and the headphones output.
The AUX [1] and [2] outputs are unaffected by this effect.
The reverb can be adjusted in several ways by accessing the dedicated controls through the display. For further
information on this subject, read the
Reverb section (page 41 ).
This knob selects the reverb style.
Available reverb styles are:
Reverb Description
Room Simulates the reverb of a room.
Hall Simulates the acoustics of a concert hall.
Stage Simulates the acoustics of a concert stage.
Plate Simulates the reverb created by a metal plate, which was very common in the '70s.
Spring Simulates the reverb created by a spr
ing mechanism, as used in the amplifiers during the ’70s.
Tape Simulates the reverb produced by a tape recorder and a reverb chamber
[DRY / WET] knob.
Balances the direct and reverberated signal.
[REV ON] button.
Reverb On / Off switch.
1
2
3
NB
- Press this knob to select the reverb type of the selected category.
- Press and hold the knob for a short while to access the reverb parameters.
4
5
1 2
3
4
5
6
8
7
9
10
11
19
14
16
12
15
17
18
20
13