ViscoTec PreeFlow eco-CONTROL EC200 DUO, Инструкция по эксплуатации и техническому обслуживанию

Страница: 26 / 44

Dosing system eco-CONTROL EC200 DUO
Operating and maintenance instructions
26 / 43 Version 1.4 Copyright ©
Notice: If one of the two analogue inputs is active, this will
be indicated in plain text in the display of the Start / Stop
Program (display 44) instead of the dynamic flow rate
display.
Di
sp
la
y 4
4
5.10.13 Time and date
• Press PRG , system selection menu ,
display 2 appears.
• Select Administration , display 25 appears.
Displa
y 2
• Select Set the time , the time and the
date can be set by field in the status bar using the NAVI-
wheel .
• Confirm the setting with PRG
Di
sp
la
y 2
5
5.10.14 System and error messages
Switching error messages on / off
• Press the PRG key, the start screen , display 2
appears.
Dis
pl
ay 2
• Press and hold down the START key.
• Press the Quantity program key,
Config. error messages are displayed (display 33).
Select the desired error message and press the
Enter key to switch on or off.
Displa
y 33
A2 activ
Start/stop Esc
Suckback Flow rate
0% 100%
00.000
ml
O
Start/ stop
Calibration auto
Calibration manuell
Service
Flush manually A
Flush manually B
Administration
Programs
10 47h
Fr 18.03.11
10 47h
Fr 18.03.11
Dosing System
eco-Control EC200 DUO
Config. alarm messages
Level control
Primary pr. control
Over-curent control
Volume OK
Volume alarm
10 47h
Fr 18.03.11
Off
Off
On
30
30