1 of 6 pages
VIS054 Operation Manual
The
VIS054
is operated by 4 button,it is MODE, SETUP, UP, DOWN for operation,which is also can be
controlled by IR remote controller.It has the saving the program function means that the fixture will keep the same
program as the last time when you re-open the light.The unit has the temperature protection function.It will turn
off the light once its inner temperture is over 85C,but wouldn’t affect the connected lighting work.
Specification
·
Input power:AC 100V-240V 60Hz/50Hz
·
Power consumption: 120W
·
LEDs: 12pcs 8W(4 in one)
·
Beam angle: 40 degree
·
3PIN female XLR socket and 3PIN male XLR socket
·
4 button Digital LED display for easy operation
·
Each LED can be controlled individually
·
Selectable manual dimmer,built-in program,Auto run,DMX mode,slave mode,sound-activated.
·
Housing:aluminum
·
Weight:6.5kgs
·
Size:1100x180x165mm
·
IR remote available
·
AC power cord on rear to daisy chain power
Operation mode
·
manual dimmer color mode
·
built-in program select mode
·
auto run mode
·
sound-active mode
·
slave mode
·
DMX mode(3 modes)
The above six operation modes are selected by MODE button.When you insert the power plug, the led bar is
on,press “MODE” and “SET UP” button at the same time, it will initialize the product at the auto run mode.To
make the display stay on all of the time press the MODE and UP buttons at the same time.To make the display
turn off after 20 seconds, press the MODE and DOWN buttons at the same time.
OPERATION
Press
“
MODE
”
button to activate the main menu,press"SET UP"button to activate the submenu,press “UP”
and ”DOWN” button adjust the related value.
A.Dimmer color mode:
Press"MODE ” button to active manual dimmer running mode,
“
CoLr
”
is display, press “SETUP” button to select
four color, red "r.XXX”, green”G.XXX” , blue”b.XXX” and white"h.XXX"is display. Press “UP” and “DOWN”
button to adjust the brigtness value 0-255 of every color, total 256 value, the bigger value the brighter.
B. Built-in program select mode
Press “MODE” button to select this mode,the LED display show ”Pr.XX”. Under this mode, press “SETUP”
button to select built-in program, jumping speed and fade speed.When “Pr.XX” is display,press “UP” or “DOWN”
button to select built-in program 1-12, as follow:1.static color selection, 2.fifteen color slow dream, 3.fifteen color
fade change, 4.fifteen color jumping, 5.fifteen color signal direction flow,6.fifteen color double direction
flow,7.fifteen color signal direction flow+ dream 1,8. fifteen color signal direction flow+ dream 2, 9. signal
