Virtus L 60, Руководство пользователя

Страница: 39 / 78

PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 39
7.3 Switch off machine
1. Switch off the grinding material in feed device (accessories).
2. Wait until the remaining grinding material has been ground, and
then switch off the shredder, (main switch to 0).
3. Switch off the grinding material discharge device.
7.4 Manual in feed of grinding material
DANGER
Rotating knives.
Can cause serious cutting and crushing injuries, possibly
leading to death.
Do not reach into the in feed hopper or lean in whilst the
rotor is running (pay attention to the run down time). Only
use approved grinding material.

Throw the grinding material into the in feed hopper.
The machine should be feed from the front.
If in your design of machine an additional in feed device is
installed, please observe the additional information for work with
and on the in feed device
Part B: Accessories.
DANGER
Do not climb into the in feed hopper while operating the
machine. You will die.