Virtus L 60, Руководство пользователя

Страница: 38 / 78

PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 38
7 OPERATION
Have you read and understood the operation manual, in
particular the safety advice in the Chapter Four?
You may not operate the machine until you have done so!
TIP
Should faults occur during work with the machine, please
observe the advice in the chapter Error! Reference source
not found..
7.1 Machine checks before switching on the machine
Check See
1. The knives are properly set and the screws
are tightened with the specified torque. Replacing and checking the cutting knife
mountings.
2. The grinding chamber is free of foreign
matter. Cleaning the machine.
3. The housing flaps are closed.
4. All safety devices, including those of the
installed grinding material in feed and
discharge devices, are checked and
operative. Checking the protective devices.
7.2 Switch on machine
1. Switch on the grinding material discharge device.
2. Switch on the Shredder (main switch to 1). Wait until the rotor has
reached its full speed.
3. Switch on the grinding material in feed device (accessories).