12
I’m playing a game that was made for the Omni, but the speed is not analog.
Check that Omni Connect is in Gamepad mode. If it is in Keyboard mode, you may lose analog
speed.
I’m not able to move in a legacy game (an older game not made for VR).
Check that Omni Connect is in Keyboard mode.
Check that the game itself is not set to only receive input from a gamepad.
I’m in Keyboard mode, but it’s not picking up my steps consistently.
Try increasing the Speed Sensitivity in the Advanced Window of Omni Connect.
I’m in Keyboard mode, and every time I turn on the spot it triggers movement.
Try reducing the Speed Sensitivity in the Advanced Window of Omni Connect.
I’m trying to play a native Omni game with De-Coupled movement, but I’m always
heading in the direction I am looking, or when I walk forward my character goes in a
different direction.
De-Coupled is typically selected in-game, followed by calibration. You should be prompted to
press a button while looking straight ahead. If you do not see this prompt, try restarting the
game and selecting ‘De-Coupled’ from the game options again.
I am not able to play a legacy game in gamepad mode.
The Omni Gamepad mode can emulate a standard gamepad controller but not an XBOX
controller. Games that require XBOX controller input will not recognize the Omni. To do so,
additional software like X360CE is needed.
Enable keyboard and mouse in the control section of your game’s options menu and put the
Omni in Keyboard mode. You should be able to control your avatar via emulated WASD for
forward, backward, and strafing as this control scheme is supported by most PC games.
