VIRTUFIT Elite Comfort, Руководство пользователя

Страница: 18 / 40

EN
VirtuFit Elite Comfort Treadmill
18
MAINTENANCE
ATTENTION:
In order to prolong the lifespan of the treadmill, we suggest switch off the treadmill
for about 10 minutes after 2 hours’ exercising. Running belt is too loose or tight will do harm to the
treadmill. So keep a suitable tightness is very important. We suggest you grasp the running belt and pull
it up to a certain distance until you cannot pull it up anymore. If the distance is between 50-75mm, we
think the tightness of the running belt is suitable.
Lubricate the treadmill
• Lubrication of the treadmill is necessary every time 300 km has been walked on the treadmill. The
treadmill will make an alarm “di di di” and the screen will show “OIL” to inform you of your treadmill
needs oil lubrication. Apply the oil to the center of the treadmill mat.
• After lubrication press the STOP key for more than 3 seconds in standby mode and then the machine
will sweep off the alarm and lubrication information. We suggest you lubricate the machine as
the following method: People who use the treadmill less than 3 hours per week, please lubricate the
machine per 6 months People who use the treadmill less than 3-5 hours per week, please lubricate
the machine per 3 months 3 People who use the treadmill more than 5 hours per week, please
lubricate the machine per 2 months.
• Running belt is off-center: The Running belt may become off-center after using for a period of time.
First allow the machine to run by it-self and the belt may centralize automatically. If it does not
centralize automatically, you can adjust the position of the belt by screwing the bolt shown in the
images below. If the running belt has shifted to the right, you need to tighten the screw on the right
of the belt or loosen the screw on the left. If the belt has moved to the left, do the opposite.
• Belt Slipping: Please adjust bolts according to the diagram below. When adjusting the two sides
make sure each adjustment is the same, on either side of the treadmill. We recommend adjusting by
half a turn until the running belt does not slip or deviate. Avoid making the belt too tight as this may
damage it.
NOTE:
Any repair must be done by a professional technician unless otherwise specified by the supplier
or manufacturer.
LUBRICATION