Virtual Console BRI-8U, Руководство пользователя

Страница: 15 / 23

Figure : Version information from ISDN Manager About tab
On the main screen, you set the “switch-type” (see Table 1).
To set individual port characteristics, click on the appropriate “Port” tab. The screen will then show the current
phone number and, when applicable, SPID number (see Table 6) for each B channel on the port. You can then
set the values as required.
If you need to configure a B channel in “nailed up”, “semi-permanent”, or “dedicated line” mode, check the
appropriate box at the top of the ISDN Manager screen.
Configuring ISDN Simulator via Terminal Server
Many test environments control all devices from a single point, using a terminal server to connect to all devices
at a remote site. You can control the ISDN simulator in this manner. You must set the asynchronous interface
on the terminal server to the values in Table 3, and use the commands in Table 5.
13
User Manual
8 Port BRI-U ISDN Simulator