4: Setting up the GSM (3G) modem for a primary WAN link
Configuring a GSM (3G) modem on a GW2040 Series Router
© Virtual Access Ltd.
Issue: 1.5
Page 27 of 34
Figure 22: The save configuration to flash page
In the drop-down menu select the Config you want to save changes to and click
Save
.
There are 3 options to save to:
Config 1
Config 2
Alternate Config
It is good practice to save to
Alternate Config
in case your committed configurations
are unsuccessful.
If you select a different configuration option to the existing configuration, you will need
to change the Boot Config to reload into the correct configuration.
4.2.12
Reload the configuration
In the Expert View menu, select
set boot configuration
.
In the drop-down menu, select the Config option you have chosen to save to.
Click
Select
.
Figure 23: The next boot configuration page
