4: Setting up the GSM (3G) modem for a primary WAN link
Configuring a GSM (3G) modem on a GW2040 Series Router
© Virtual Access Ltd.
Issue: 1.5
Page 25 of 34
Inactivity Timer
Period of inactivity elapsed before the
call connection is disconnected.
Set Dial Neighbour
Inactivity Timer
Minimum Duration
Minimum connection time before the
inactivity timer becomes active.
Set Dial Neighbour
Minimum Duration
Maximum Duration
Maximum time that the connection
should be maintained.
Set Dial Neighbour
Maximum Duration
Table 11: The call details fields, their descriptions and command lines
On the Call Details page, enter the number for the GSM (3G) modem to connect to.
Normally, *99# is a valid string. Ensure that ‘Permissions’ is set to
call
.
Click
Update
. The Configuration Update Result page appears.
4.2.10
Configure the modem interface
In the Expert View menu, select
interfaces -> modem-0 -> modem interface
. The
Modem Interface page appears.
The modem is set to US country code by default. To change the required country code,
on the Modem Interface on modem-0 page, click
Advanced
.
Figure 20: The modem interface page
Set Enabled to
yes
.
