VP-6228(T) USER MANUAL
26
Step4:
For the first screen of FDISK, answer the question:
Do you want to enable large disk support?
[Y] if you want to build a partition larger than 2GB.
[N] if you want to build a partition small than 2GB.
Step5:
The next screen is [FDISK OPTIONS]. Type [5] to select the disk.
WARNING!!
If you don’t change the fixed disk drive to the
USB 2.0 Hard Disk, the data of your internal
hard disk will be destroyed!
Step6:
In the [Change Current Fixed Disk Drive], type the disk drive num-
ber that is assigned to the USB 2.0 Hard Disk.
Step7:
Go back to [FDISK OPTIONS] screen, Now you can create or
delete a partition of the USB 2.0 Hard Disk.
Step8:
After you finish FDISK, go back to the Windows screen, discon-
nect and then reconnect the USB 2.0 Hard Disk again to activate
these changes. Double click on [My Computer]. The USB 2.0 Hard
Disk Drive icon that you have now partitioned should be seen.
Important:
You must type [5] in this screen to change the current fixed
disk drive to build a partition. The default fixed drive set by
FDISK is your internal hard disk drive.
