VIPA TM-E 900-1E640, Руководство пользователя, Страница: 21 / 68

Manual VIPA TM-E Chapter 2 Hardware description
HB39E - TME - RE_900-1E640 - Rev. 09/11 2-3
Structure
[1] LEDs
[2] RJ45 Ethernet interface
[3] RJ11 PSTN modem (analog)
[4] Reset button
[5] RS485MPI interface
[6] DIP switch MPI interface
[7] Connector for DC 12...24V
power supply
[8] Connector for digital I/O
1
2
3
5
4
7
8
6
At the front-side of the TM-E module there are two rows of LEDs. The
following table shows you the usage of the LEDs and the according colors:
Label Color Meaning
POWER green Power supply is active.
USER green blinks: The TM-E module is ready for
communication (ca. 20s after PowerOn)
red blinks: IP address not valid (just exist)
red/green blinks alternating: The TM-E module is just
waiting for an IP address during boot-up.
The LED is also used with the Reset.
More about this may be found at "TM-E - Reset".
Serial green blinks: The TM-E module is communicating with
the PLC via MPI.
MDM green on: The modem of the TM-E module is physically
connected.
LINK green on: The TM-E module is physically connected to
Ethernet.
ACT green blinks: The TM-E module communicates via
Ethernet (activity).
DI green on: The digital input of the TM-E module is "1".
POWER
SERIAL
LINK
DI
USER
MDM
ACT
DO
DO green on: The digital output of the TM-E module is "1".
TM-E Analog
Components
LEDs