VIPA SLIO 001-1BA00, Руководство пользователя, Страница: 33 / 48

Manual VIPA System SLIO
Chapter 2 Power modules
HB300E - PS-CM - Rev. 11/28 2-3
VIPA 007-1AB00 - DC 24V 10A
If the 10A for the power section supply of the I/O area is no longer
sufficient, you may use the power module. So you have also the possibility
to define isolated groups.
The power module is externally to be supplied with DC 24V.
•
10A feed-in for DC 24V power section supply I/O area
•
Overvoltage protection
•
Polarity reversal protection
1
3
5 4
6
7
8
9
2
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9] Locking lever terminal module
Labeling strip
Backplane bus
LED status indication
DC 24V power section supply
Electronic module
Terminal module
Locking lever electronic module
Terminal
LED Color Description
RUN green RUN MF
MF * red ● ○ DC 24V OK
● ●
Fuse defective
Status display
RUN
MF
on: ● off: ○
*) This LED is only available on the power module with hardware release 1. Information
concerning the hardware release may be found underneath the label strip.
Description
Properties
Structure