VIPA SLIO 001-1BA00, Руководство пользователя, Страница: 32 / 48

Chapter 2 Power modules
Manual VIPA System SLIO
2-2 HB300E - PS-CM - Rev. 11/28
Safety precautions
The Power modules were designed and constructed:
•
to be installed on mounting rail along with System SLIO components
•
for installation in a cabinet with sufficient ventilation
•
for industrial applications
The following precautions apply to applications employing the Sys-
tem SLIO power supplies.
Danger!
•
The Power modules must be installed in protected environments that
are only accessible to properly qualified maintenance staff!
•
The Power modules are not certified for applications in explosive
environments (EX-zone)!
•
You have to disconnect the Power modules from the main power source
before commencing installation or maintenance work, i.e. before you
start to work on a power supply or the supply cable the main supply line
must be disconnected (disconnect plugs, on permanent installations the
respective fuse has to be turned off)!
•
Only properly qualified electrical staff is allowed to install, connect
and/or modify electrical equipment!
•
To provide a sufficient level of ventilation and cooling to the power
supply components whilst maintaining the compact construction it was
not possible to protect the unit from incorrect handling and a proper
level of fire protection. For this reason the required level of fire
protection must be provided by the environment where the power supply
is installed (e.g. installation in a switchboard that satisfies the fire
protection rules and regulations)!
•
Please adhere to the national rules and regulations of the location
and/or country where the units are installed (installation, safety
precautions, EMC ...).
Appropriate use