Chapter 1 Hardware description
Manual VIPA HMI
1-10
HB160E - TP - RE_610-3B4I1 - Rev. 11/07
Dimensions
installation width
in
s
tal
la
ti
on
hi
gh
t
installation
depth
width
hi
gh
t
For the installation of the Touch Panel in control cabinets and desks the
following dimensions are necessary:
Front panel width
1.5 ... 6mm
Installation cutting (W x H)
287 x 217mm
Front panel (W x H)
304 x 233mm
Back side (W x H x D)
285 x 215 x 45mm
Installation depth
45mm
Note!
The degrees of protection are only guaranteed when the following is
observed:
•
Material thickness at the mounting cut-out: 1.5 ... 6mm
•
the deviation from the plane for the panel cut-out is
≤
0.5mm. This
condition must be fulfilled for the mounted HMI device
•
Permissible surface roughness in the area of the seal:
≤
120µm
(friction coefficient 120).
Installation
dimensions
10.4''
610-3B4I1
