VIPA 313-6CF03, Руководство пользователя, Страница: 94 / 152

Chapter 5 Deployment I/O periphery
Manual VIPA System 300S SPEED7
5-8 HB140E - CPU SC - RE_313-6CF03 - Rev. 07/45
Digital part - Parameterization
Parameters of the digital part may be set by means of the
DI16/DO16
submodule of the CPU 313C-2DP from Siemens during hardware
configuration.
In the following all parameters are specified, which may be used with the
hardware configuration of the digital periphery.
This provides the short description of the digital periphery. At
Comment
information about the module such as purpose may be entered.
At this register the start address of the in-/output periphery may be set.
Here there are the following adjustment possibilities:
•
Hardware interrupt
•
Input delay
For the digital output channels there are no parameters.
A hardware interrupt may be optionally triggered on the rising or falling
edge of an input. A diagnostic interrupt is only supported together with
hardware interrupt lost.
Select with the arrow keys the input and activate the desired hardware
interrupt.
The input delay may be configured per channel in groups of four. Please
note that in the parameter window only the value 0.1ms may be set. At the
other values 0.35ms is internally used for input delay.
Parameter data
General
Addresses
Inputs
Hardware interrupt
Input delay