VIPA 134-4E Series, Руководство пользователя

Страница: 27 / 46

Manual VIPA System 100V Chapter 2 Hardware description and deployment
HB100E - EM - RE_134-4Ex - Rev. 08/23 2-9
Project engineering
The project engineering of a System 100V takes place in the Siemens
SIMATIC manager by including of the System 100V GSD file
VIPA_11x.gsd from VIPA.
After inclusion of the GSD file and refreshing the hardware catalog,
besides of each System 100V CPU, every expansion and System 200V
module, which may be connected, may be found.
To be compatible with the Siemens SIMATIC manager, you have to
execute the following steps:
•
Project the Profibus-DP master system with CPU 315-2DP
(6ES7 315-2AF03). Please use for the project engineering
of the CPUs starting from Firmware V. 3.5.0 the
CPU 6ES7-315-2AF03 V1.2 from Siemens.
•
Insert the Profibus slave VIPA_CPU11x with address 1.
•
Place your CPU 11x at slot 0 of the slave system.
More about project of a System 100V CPU engineering may be found at
the manual HB100_CPU at "Deployment CPU 11x".
After you have configured your CPU, the expansion modules are placed by
choosing the module with the order number 134-4EE00 from the hardware
catalog and dropping it to the slot below of the CPU.
Note!
Every analog module occupies one slot!
Maximum 4 analog modules may be connected
(max. 7 modules at VIPA 115-6BL72).
Approach