Power Over Ethernet Switch for IP Intercoms
INTIPMONPOE User Manual
v1.3
Chart 1-1
Caution:
•
All installation and operation here should conform to your local electrical safety codes.
•
We assume no liability or responsibility for any fire or electrical shock caused by improper handling or installation
•
We are not liable for any problems caused by unauthorized modifications or attempted repair.
•
The device should be installed in a cool, dry place away from direct sunlight, flammable, explosive substances, etc.
For product detailed information, see Chart 1-1.
1. General Introduction
The product appearances are as follows. Please see Figure 1-1 and Figure 1-2.
No.
Name
Description
1
DC IN Power Plug
24V DC Power Input
2
OFF/ON Switch
Power Switch
3
Up Interface IN
PoE switch cascading up port
4
Down Interface OUT
PoE switch cascading down port
5
Monitor Port 1-4
Connect digital monitor 1-4
6
Monitor Port 5-6
Connect digital monitor 5-6
7
Monitor Port 7-8
Not usable
8
Indicator
Power indicator (Red)
Indicator on:
Power supply is normal.
Indicator off:
No power supply.
Run indicator (Yellow)
Indicator flashing:
Monitor works as normal.
Indicator off:
Not detected.
Figure 1-2
3
4
1
5
6
8
7
2
Figure 1-1
ACTIVE ONLINE - 1300 816 742
