Viotek GN32DR, Руководство пользователя

Страница: 8 / 20

8
Section 5: Wall Mounting
This monitor ONLY includes screws which may be used when attaching the monitor to
a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor
was already attached to the stand, remove the stand.
Monitor
Stand Base
Foam
Foam
Stand Stem
2. Remove the original screws from the opening in the back of the monitor.
3. Follow the directions received with your mount, stand, or accessory and install the monitor
on the wall or fixture as desired. Remember to use the included NO. 3 screws when
attaching anything to the back of the monitor. Refer to the image (
1
) for correct screw
placement.
1
Use the 31mm
NO. 3 Screws x 2
Use the 26mm
NO. 3 Screws x 2
- Do not discard the original screws.
- Use only the NO. 3 screws provided for mounting. You MUST
follow the figure above for secure installation.
Mount
(Not included)