11
4. Hold the Door carefully with your assistant and place it on the top of Bottom Hinge , make sure the
Pivot Hinge is at correct place through the Hinge Washer. Insert the pin of the Upper Hinge into the
Bushing on the top right and fix it with Hex Head Screw (4pcs). Cover the Upper Hinge and Bottom
Hinge with Upper Hinge Cover and Bottom Hinge Cover. Cover hinge screw holes on the top right
with the Hole Cover.
Note
:
All the instructions in this manual are for explanatory purpose only your appliance may be slightly
different.
CARE & MAINTENANCE
Clean your wine cellar
Turn off the power, unplug the appliance, and remove all items including shelves.
Wash the inside surfaces with a warm water and diluted mild detergent.
Wash the shelves with a diluted mild detergent.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.
Содержание VZ143VSUG
