Operators Guide
17
Mounting the camera using 3/8 in. camera mounting screws
The camera slide plate (16) is secured to the base of the camera using either two 3/8 in. camera
screws or a 1/4 in. screw pin adaptor (see Mounting the camera using the 1/4 in. screw and
pin adaptor on page 19).
To mount the camera onto the head:
Remove the camera slide plate (16) from the head (Fig. 3). Turn the slide plate clamp
(13) approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then
push the slide lock release (14) in a forwards direction to release and eject the slide plate
(16). When released, the camera slide plate (16) can be lifted upwards and removed
from the head.
Fig. 3 Removing the camera slide plate
(13)
(14)
(16)
Содержание Vision 10AS
Страница 1: ...Vision AS pan and tilt heads Operators Guide Publication Part No V4045 4980 Vinten simply perfection ...
Страница 11: ...Vision AS range of Pan and Tilt Heads 10 Fig 1 Vision AS pan and tilt head front and right hand side 1 2 3 4 5 ...
Страница 31: ...Vision AS range of Pan and Tilt Heads 30 Fig 15 Adjusting the pan and tilt brakes 10 1 12 1 10 2 10 12 2 12 ...