17
Changing the skid tracking width
The movable skid legs can be set to either of two positions. Position 1 is for normal use and gives
maximum stability. Position 2 provides a reduced width for tracking through narrow doorways etc.
To change the tracking width:
Set the column to its lowest setting and engage the safety catch
are released and then turn the skid wheels so they are pointing
at right angles to the skid legs.
Reach under the pedestal, depress one of the spring-loaded locking plungers and move the
leg to the required position, ensuring that the plunger has engaged correctly at the new lo-
cation.
Repeat for the second leg.
WARNING! To ensure maximum stability when the skid is set to narrow
track, particularly when moving over uneven ground, reduce
pedestal height to a minimum
Optional Wheels
(26.1)
(26.2)
(26.1)
(26.3)
