Vinteck
TB10MKII – TB5 –True-bypass MIDI pedalboard
pag.8
Edizione 02 rev.1
WIRING AND CONNECTIONS EXAMPLES
IMPORTANT NOTE: TO AVOID RISK ON GROUND NOISE THE TB10MKII MUST BE CONNECTED TO
THE SAME SOCKET OF AMPLIFIER.
TB5 must be powerd with original power supply only.
Insert the power supply cord in his plug. When powered the TB5 is active.
TB10MKII is powered with 230VAC 50Hz. (115 FOR us) Switch and fuses are on left side.
WORNING : never cut the wire of 220/12VAC power supply.
Never open the TB5 power supply. 220VAC inside when connectend to 220 plug.
Vinteck sas do not have any responsibility in case of damage to people, animals or objects in caseof
non respectof this point. No worranty will be applied if power supply unit is disassembled or modified.
Never disassembly the power switch of TB10MKII. No worranty will be applied ifswitch power supply
group is disassembled or modified.
TB10 allow several way to connect to systems. You can see some example.
Example 1.
5 stomps chain and out to amp.
Example 2
Chain of 5 stomps. Volume in buffer and then to True IN.
Volume pedal in Ext loop. Note: volume must be low impedance (25Kohm max) to do not have problems with
buffered signal. 3 stomps in front of amps, 2 in send/return. Tuner in B out for silent tunings.
