Vinteck
TB10MKII – TB5 –True-bypass MIDI pedalboard
pag.6
Edizione 02 rev.1
5-
installation and connections
(
wiring)
All connections are on TB10 back.
- AC IN
Power supply IN. Use only original power supply.
- IN BFR
Signal IN with buffer. Connect the guitar or bass here.
DO NOT insert preamplified signal. Device may be dameged.
It is raccomendend do no insert buffered signal. Use the true bypass IN.
- IN TRUE
In true bypass. Any kind ofsigna may be inserted. (preamplified, bufefred)
- OUT BFR
Buffered sugnak OUT. May be used as loop with inTrue (for example to insert a tuner)
- LOOP1-10
loops. Driver by buttons 1 to 10 (1-5 for TB5)
SND
Out signal, to stompbox IN
RTN
In signal, back from OUT of stomp box.
- EXT LOOP
Serial loop. To be used for always on stomp box (es reverb) or to connect the amps serial
loopand use loop 10 for premaplified signal.
SND
Out signal
RTN
IN back signal
- OUT A
Out signal to amp (or to return in case EXTLOOP with amp send/return )
- OUT B
Second amp out. Or tuner out. To be programmed
- MIDI IN
MIDI in signal (form external pedalboard or sequencer)
- MIDI OUT
MIDI,send
- SWITCH 1-4 NA switch . Close ground on hot of 6,3mm mono jack. To drive amps channel change, May be
used as tap tempo. Drived by button 1 or by a program change.
- POWER
SUPPLY
9Vdc
8 plug to supply 9 volts stomp boxes. Positive voltage on external circle. Max power 1000 mA
- POWER
SUPPLY
9Vdc
5 plug to supply 9 volts stomp boxes. Positive voltage on external circle. Max power 1000 mA
POWER
SUPPLY
18Vdc
2 plug to supply 12 volts stomp boxes. Positive voltage on external circle. Max power 500mA
