Half Island Display Rack
(IDR-H) Assembly Instructions
Wine Master Cellars, LLLP • 10645 E 47th
Ave, Denver
, CO 80239 • phone: 866.650.1500 • fax: 866.650.1501
Please feel free to contact us regarding the assembly of this product.
2.
Attach racks to frame
- Using a base cradling rack, and starting
on
the
left side of
the
assembled frame, align
the
mounting
holes
in racks
with
the
holes
on crossr
ails.
Temporarily place alignment
After securing top and bottom of
the
rack
with
the
provided WS
Assembly Screws, remove alignment tool and replace
with
WS
Assembly Screw
.
Repeat for
each
rack set, alternating between
base and neck r
acks.
Fully
tighten
cross rail assembly screws from
step 1.
†
IDR Extension packages contain only 1/2 the quanti
t
y of noted items.
Hardw
are shown
actual size
3 X
WS33
or
WS43
4 X
†
Footer Pad
3 X
IDR
-CR3
1/2 X
IDR-PR
2 X
†
IDR3-UPRIGHT
or
IDR4-UPRIGHT
12 X
Crossrail Assembly
Screw
3 X
IDR-PR Assembly
Screws
18 X
WS Assembly
Screw
2 X
†
IDR-PR Assembly Bolt
4 X
†
IDR-PR Assembly
W
asher
R
equired tools:
IDR-
AK - included with IDR and contains an
8mm Nut Driver and Alignment Tool
Electric Screw Dri
v
er with #2 Phillips Bit
2 X 14mm (or adjustable)
W
rench
1.
Assemble frame
-
Thread
footer pads into
the
front-bottom
of
the
uprights.
For
the
rear footer pads, place a rear footer
pad was
her
over
the
shaft
of a footer
pad.
Insert and
hold
a
rear footer pad nut inside
the
tube, aligned
with
the
pre-drilled
hole,
and
thread
the
footer pad into
the
nut.
Tighten
all of
the
footer pads
with
a
14mm
wrench.
Lay down one
upright
and
attach
all
three
crossrails using
the
provided crossrail assembly
screws in
the
predrilled mounting
holes.
Do not fully
tighten
at
this
point to allow for
adjustments
during assembly
.
Stand
Rear Footer
Pad Nut
2 X
†
Rear Footer Pad
W
asher
2 X
†
1 X
IDR-H-PRR
Wine storage system
WINE CELLAR
I
N
T
E
R
N
A
T
I
O
N
A
L
Exclusive dealer of
